To Next PageTo Next PageWhat to do if my Bose TV turns on and off unexpectedly?
If your TV turns on and off unexpectedly, reposition the TV on/off sensor on the back of your TV. Also, check the SCART connector if you use one, and verify that the TV on/off sensor is working properly by checking the TV Power Status under the Video tab in the System menu.
Why does my Bose Lifestyle® remote behave erratically?
If your Lifestyle® remote is behaving erratically, check the batteries and their polarity (+ and –). If you are using a plasma display TV, make sure the media center power source is as far away from the TV as possible. Also, try moving the remote (or the media center) a few feet to avoid an area of “dead spots,” and ensure the remote control and media center house codes match.
How to fix distorted sound on Bose Lifestyle V10 Home Theater System?
If the sound from your Bose Home Theater System is distorted, make sure the speaker cables are not damaged and the connections are secure. You can also try reducing the output level from any external components connected to the media center.
What to do if there is no sound from my Bose center speaker?
If there is no sound from your center speaker, make sure the center speaker cable is connected at both ends. Also, ensure that you have selected 3- or 5-speaker mode.
Why is there no sound from TV, DVD, VCR, CBL·SAT, or AUX on my Bose system?
If there is no sound from TV, DVD, VCR, CBL·SAT, or AUX, check the connections and make sure that the component is turned on.
How to fix no sound from surround speakers on Bose system?
If there is no sound from your surround speakers, select 5-speaker mode. Also, increase the Surround setting for the source being played, and ensure the video sound source is stereo-encoded or surround-encoded, and the component used (DVD, VCR, DVR, etc.) is stereo.
What to do if TV screen goes dark after changing video settings on Bose?
If the TV screen goes dark or the image flips repeatedly after making a change to a Video feature in System settings, in the System menu, make sure the Video format is set to NTSC (U.S. standard) or PAL (European standard). Also, in the Settings menu, make sure the SD Progressive Scan setting is off, unless you have used a component video connection and progressive scan is a feature of the TV.
Why is my Bose radio not working?
If your Bose radio is not working, make sure antennas are connected properly. Move the AM antenna at least 20 inches (50 cm) from the media center, display module, and Acoustimass® module. Adjust the antenna position to improve reception, and ensure the AM antenna is in an upright position. Also, move antennas farther from the media center, display module, TV, or other electronic equipment. Finally, try selecting another station.
How to fix no video on screen with Bose Lifestyle V10 Home Theater System?
If there is no video on the screen, though the TV audio functions, check the TV video input selection. Make sure it is correct for the video source.
What to do if my Bose system turns on by itself?
If your Bose system turns on by itself or behaves erratically, change the house code setting to prevent signals from conflicting with another nearby Lifestyle® system.
General| RMS rated power | - W |
|---|---|
| Audio output channels | 5.1 channels |
| Radio Data System (RDS) | Yes |
| Dimensions (WxDxH) | 44 x 191 x 68 mm |
| Surround speaker dimensions (WxHxD) | 76 x 76 x 102 mm |
| Audio (L/R) in | 5 |
| HDMI ports quantity | 3 |
| Digital audio coaxial in | 1 |
| Package weight | 32700 g |
Weight and Dimensions| Subwoofer dimensions (WxDxH) | 549 x 330 x 203 mm |
|---|
Essential safety warnings to prevent shock, fire, and damage to the system.
Space to document system serial numbers and purchase details for future reference.
Welcome to the system, overview of setup process, and resources like Setup Guide.
Guide for first power-up, configuration, and post-setup actions.
Tailoring sound with ADAPTIQ, checking components, and connecting cables.
Instructions for placing media center, display, speakers, and Acoustimass module.
Connecting antennas, TV sensor, SCART adapters, audio, and IR emitters.
Explanation of the system display unit and the primary functions of the remote control.
Detailed description of buttons for power, source selection, and navigation.
Setting up the remote to control the TV and adjusting TV-related settings like screen shape and audio delay.
Programming the remote to control DVD, VCR, Cable/Satellite, and AUX devices.
Controlling HDMI image view, resolution, radio operation, and advanced audio settings.
Guidance on system maintenance, cleaning, and power supply voltage.
Changing remote switch settings and setting up Bose link for multi-room audio.
Solutions for power, sound, remote control, and interference problems.
Definitions of audio, video, and system-related technical terms used in the manual.
Legal notices regarding copyright, distribution, and licensing of the product's technology.
