12
SYSTEM SETUP
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
Interactive kit
What you need for the following steps:
Congratulations! At this point you have set up the
control console, the Acoustimass
®
module, and the
speakers. You are now ready to turn on your system
and enter the interactive phase of the setup process
using the Unify
TM
intelligent integration system.
IMPORTANT!
• Before you start, make sure your speakers and
Acoustimass module are in their final
positions.
• Do not connect any devices to the control
console at this time. The instructions provided
on your TV will tell you when to do this.
1. Slide the battery compartment cover off the back
of the remote control.
2. Install four AA (IEC LR6) batteries, matching the
polarity markings (+ and –) to the markings inside
the battery compartment.
3. Slide the battery cover back into place.
To Next Page
Loading...
