English – 9
POWER ON/OFF CONTROLS
Starting your system
Press the power button on the remote or on the console to start your system.
In several seconds, the power LED on the console changes from blinking to
steady green. The system is now ready to use.
You also can start the system in two other ways:
Pressing the remote SOURCE button also starts your system and puts the
SOURCE menu on your TV screen.
Pressing the Setup button on the console also starts your system and puts
the UNIFY
®
menu on your TV screen.
Turning on your TV
If you programmed your remote during the initial setup, press the TV power
button on the remote control to turn on your TV. Otherwise, use the remote
that came with your TV.
Shutting down your system
Press the power button on the remote or on the control console. The system will
shut down automatically after a few seconds.
However, if you decide to access the power controls for connected devices,
automatic shutdown will be stopped and you must complete the shutdown using the
onscreen controls.
To Next Page
Loading...
