6
SYSTEM SETUP
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
CAUTION: DO NOT
stand the Acoustimass
®
module on its front or
back end.
3. Plug the free end of the audio input cable into the
Media Center connector on the Acoustimass
module.
Make sure the flat surface with the arrow faces the
front of the module.
4. Remove a power cord
from the power cord kit.
5. Plug one end of the power cord into the AC Power
connector on the Acoustimass module. Make sure
you push the plug in as far as it can go.
6. Plug the other end of the power cord into a live
AC (mains) power outlet.
7. Continue with Kit on the next page.
To Next Page
Loading...
