Bose Lifestyle VS-2 - Connecting Your A;V Devices to the VS-2; A;V Device Connections for Composite TV

BASIC SYSTEM CONNECTIONS
15
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
BASIC SYSTEM CONNECTIONS
3 Connect the media center to the module
Use the audio input cable, which has a multi-pin connector at each end, to connect the
Acoustimass
®
module to the media center.
A. With the flat side of the multi-pin connector facing toward the front of the module,
plug one end of the audio input cable into the Media Center connector on the
Acoustimass module connection panel (Figure 7).
B. Plug the other end of the cable (flat side of plug facing up) into the Main Speakers
connector on the media center connection panel.
C. Make sure that each connector is fully inserted into the jack.
Figure 7
Acoustimass connection
to the media center
CAUTION: Do not put strain on the audio input cable where it connects to the module and
media center. Excessive strain, caused by pulling directly on the cable or by compressing it, can
cause damage.
Audio input cable
Media center
connection panel
Acoustimass module
connection panel
Flat side up
Main Speakers
connector
Media Center
connector
Flat side
toward front
of module