Bose Lifestyle VS-2 - New Settings Menu Items; Audio Delay Settings; Video Resolution Options; Image View Adjustments

18
Dansk Italiano SvenskaDeutsch Nederlands EnglishFrançaisEspañol
BASIC SYSTEM CONNECTIONS
BASIC SYSTEM CONNECTIONS
6 Connect video source outputs to VS-2 video inputs
The VS-2 has video input connectors for a cable/satellite box (CBL-SAT), a VCR, and one
other source (AUX). The type of video connection used for your TV determines the type of
connection you can use for a video source:
If the connection you made to your TV is:
HDMI
TM
............use any type of connection for your sources.
Component....use a component, S-Video, or composite video source connection.
S-Video...........use either an S-Video or composite video source connection.
Composite .....use either an S-Video or composite video source connection.
Figure 10
VS-2 input connections
To TV
VCR
CBL•SAT
AUX
VCRCBL • SATAUX
Not available on
VS-2 AUX IN
Note: If after turning on your
system you can’t view cable/
satellite programs through an
HDMI connection, you may need
to change the video output set-
ting in your cable/satellite box. To
do this, use another type of video
connection so you can view the
onscreen menu from your cable/
satellite box. Then change the
connection back to HDMI.