English
5
Changing ear tips
Select the eartip size that provides you with the best comfort
and fit.
1. Gently peel the edges of the attached tip away from the
earpiece, using care not to tear the tip.
CAUTION: To prevent damage, do not pull on the StayHear
®
tip wing.
2. Position the opening of the new tip over the nozzle and the
small slot over the nozzle hook.
Note: Each tip is marked with either an L or an R to
indicate which earpiece it is for. Be sure to attach the
left StayHear
®
tip to the left earpiece and the right
StayHear
®
tip to the right earpiece.
3. Ease the base of the tip down around the base
of the earpiece until the tip feels secured.
Adjusting for comfort and stability
There are several ways you can adjust your headset to provide
additional comfort and stability. Using the adjustment slider and
clothing clip you can customize how you wear your headset.
Using the adjustment slider
Move the adjustment slider up or down to reduce
or increase the amount of loose cord between the
left and right earpiece. Finding the right position
for the slider can help optimize the placement of
the Answer/End button and integrated
microphone.
Using the clothing clip
Use the clothing clip to fasten the cable to your
clothing, for convenience, stability, and to help
manage the cable. This can be helpful during
high-movement activities or when using the
headset in a single earpiece configuration.
To Next Page
Loading...
Need help?
General
