Bose MIE2 Manual&Nbsp;

English
6
Troubleshooting
If you experience any trouble using your headset, try the following troubleshooting instructions. If you still need help, or need to
purchase replacement parts, see the contact information on the inside back cover for assistance in your area.
Problem What to do
No audio/intermittent
sound/sound from
only one earpiece
• Make sure that the headset plug is securely connected to the headphone/headset jack (not the line out jack).
• Try another audio device.
• Try using the additional 3.5 mm adapter cable.
Incoming call ring
tone not heard
through headset
• Make sure your phone is set to pass the ring tone through to the headset. Check your phone settings and
make adjustments as needed.
Note: This feature may not be available on all phones.
Excessive bass • Turn off any audio enhancement features on the audio source.
Low volume/poor
audio
• Turn off any “sound checker” or other audio signal altering features on the audio source.
• Make sure ear tips and headset nozzles are clear of any debris or wax build-up.
• Make sure the volume level of the audio source is turned up.
Microphone is not
picking up sound
• Try using the additional 3.5 mm adapter cable.
• Make sure the microphone is not being blocked or covered.
The microphone is located on the back of the Answer/End button (you may notice the small opening for the
microphone).
Phone not responding
when Answer/End
button is pressed
• Try using the additional 3.5 mm adapter cable.
Note: Some phones may require you to press and hold the Answer/End button for a few seconds to perform
functions.
Phone unexpectedly
ends call
• Some phones will end a call if the headset is unplugged during a call.
• Make sure that the headset plug is securely connected to the headphone/headset jack.
• Check phone signal strength to ensure network coverage.
Ear tips falling off • Make sure the ear tips are securely attached to the earpiece and nozzle hook.
Lost ear tip • Visit owners.Bose.com for replacement tips.
Sound is muffled from
earpiece
• Make sure ear tips and headset nozzles are clear of any debris or wax build-up.
• Unplug the headset from the audio source, then plug back in making sure they are securely connected.
• Try another audio device.
01_YoYo_MIE_ENG.fm Page 6 Friday, February 17, 2012 12:35 PM

Bose MIE2 Specifications

General

Brand	Bose
Model	MIE2
Category	Headsets
Language	English