Pairing a Biuetooth® device
Bluetooth® wireless technology enables you
to
stream music from
Bluetooth smartphones, tablets, computers or other audio devices
to
the system.
Before you can stream music from a Bluetooth device, you must
pair your device with the system.
1. On the remote control, press and hold * until the Bluetooth
indicator blinks blue.
Make sure the Bluetooth indicator blinks blue before you pair
your device.
2. On your Bluetooth device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found
in
Settings. A gear
icon
(-i)) often represents Settings on the Home screen.
0
3. Select Bose Solo system from your device list.
Once paired,
Bose Solo system appears connected
in
the device list. The system emits a tone and the Bluetooth
indicator glows white.
4. On your Bluetooth device, play music
to
stream to
the system.
If
you cannot pair your device
You
may need
to
clear the system's Bluetooth pairing list (see
"Clearing the system's
8/uetooth pairing list"). After you clear the
list, try pairing again.
See "Troubleshooting" on page 18 for more information.
Bluetooth®
Connecting
to
a paired Biuetooth®
device
You
can stream audio from a Bluetooth® device to the system.
Note: If there are multiple devices stored
in
the system's pairing
list, it may take a minute or two for the paired device to
connect. The system's
Bluetooth indicator shows connection
status
(see
page
14).
1. On the remote control, press
*.
The system connects to the last two devices that streamed to
your system.
2. On the device, play music.
If
you cannot stream audio from a paired device
The system may have lost connection
to
the device. Check the
system's
Bluetooth indicator. If the paired device is out
of
range
of
the system, move the device within range.
Switching between connected
devices
The system supports multi-point connectivity, which allows you to
seamlessly switch playing music between connected devices.
The last two devices that streamed to the system remain connect-
ed. During playback, you can pause audio
on
the streaming device,
and then play music from another connected device.
1. Pause music from the streaming device.
2. On another connected device, play music.
3. Repeat steps 1 and 2 to switch between connected devices.
Clearing
the
system's
Biuetooth
®
pairing list
When you pair a Bluetooth® device to the system, the connection is
stored
in
the system's pairing list.
You
may need
to
clear the pairing
list if you cannot connect to a device. Once you clear the list, you
need
to
pair the device again.
1. Press and hold * for 1 0 seconds, until the Bluetooth® indicator
blinks blue.
2. On your mobile device, delete Bose Solo system from the
B/uetooth menu.
The system emits a tone and is ready
to
pair a device
(see "Pairing a
Bluetooth® device").
English-
13
To Next Page
Loading...
Need help?
General
