Setting
up
the
System
Placing your TV
on
the
system
Lift your TV and place it on top of the system. Follow these
guidelines:
• The Bose Solo 15/10 series
II
system is designed
to
fit under
TVs
that weigh no more than 75 lbs
(34
kg) and have bases no wider
than 24"
(61
em), and no deeper than 12.25"
(31
em).
• The base of your TV should be centered on the
top
of
the system
and must not hang over any
of
its edges.
• If the TV base is too large
to
fit on
top
of
the system, place the
sound system
in
another location such as on
an
open shelf under
the
TV,
but keep it close
to
your
TV
so the audio cable will reach.
You
can also mount your
TV
on the wall above the system.
CAUTIONS:
•
DO
NOT place a CRT type
TV
on this system. It is not designed
for use with this type
of
TV.
• Allowing the base
of
your
TV
to
hang over any edge
of
this
speaker system increases the risk of the
TV
tipping, which may
result
in
injury.
• If your
TV
comes with
an
anti-tip device, install it according
to
the
manufacturer's instructions and adjust the tether as instructed
after placing the
TV
on
top
of the system. Installing
an
anti-tip
device is recommended when using a TV with this product. If
your
TV
did not come with
an
anti-tip device, you can get one
from most retail
TV
suppliers.
To
avoid wireless interference:
• Keep other wireless equipment away from the system.
• Place the system outside of and away from metal cabinets, other
audio/video components and direct heat sources.
Sample system placement
8 - English
Turning
off
your TV speakers
To
avoid hearing distorted sound, turn off your TV speakers.
Refer
to
your TV's owner's guide for more information.
Powering on
the
system
1. Power on your
TV.
2. If you are using a cable/satellite box
or
other secondary
source, power on the source.
3. Press the Power button
(<.!))
on the remote control.
The status indicator glows green.
4. Check
if
sound
is
coming from the system.
Note: If you do not hear sound coming from the system, see
"Troubleshooting" on page 18.
Confirming your TV speakers are
off
1. Press the Mute button
(~)
on the remote.
2.
Check that no sound is coming from your
TV.
Note: If you hear sound coming from your
TV
, see
"Troubleshooting" on page 18.
To Next Page
Loading...
Need help?
General
