Bose Solo 5 - Page 5

ENGLISH - 5
REGULATORY AND LEGAL INFORMATION
Product Power State Table
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in
compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU)
No. 801/2013.
Required Power State Information
Power Modes
Standby Networked Standby
Power consumption in specified power mode, at
230V/50Hz input
≤
0.5 W N/A*
Time after which equipment is automatically
switched into mode
< 2.5 hours N/A*
Power consumption in networked standby if all wired
network ports are connected and all wireless network
ports are activated, at 230V/50Hz input
N/A N/A*
Network port deactivation/activation procedures.
Deactivating all networks will enable standby mode.
Bluetooth: Deactivate by clearing the pairing list by pressing and holding
the Bluetooth button for 10 seconds. Activate by pairing with a Bluetooth
source.
*product does not utilize a networked standby mode for a Bluetooth
®
connection and does not have the ability to be configured to a network via
Wi-Fi
®
or Ethernet
External Power Supply Technical Information
The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy
Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s): Commission
Regulation (EU) 2019/1782.
Manufacturer Bose Products B.V.
Commercial registration number 36037901
Address
Gorslaan 60
1441 RG Purmerend
The Netherlands
Model identifier DT20V-1.8C-DC
Input voltage 100V-240V
Input AC frequency 50Hz/60Hz
Output voltage 20V DC
Output current 1.8A
Output power 36W
Average active eciency 89.0%
Eciency at low load (10%) 88.3%
No-load power consumption 0.08W
Please dispose of used batteries properly, following local regulations. Do not incinerate.