18 - English
Starting Up the System
Powering on your system and
selecting your language
1. Press on the remote.
The console powers on and 10 LANGUAGE
appears on the display.
Note: After first time startup, the display defaults to your last used source.
2. Press and to select your language.
3. Press
.
Tip: Look for the
icon in the System menu if you select the wrong
language.
The system powers off after sixteen minutes of inactivity. You can disable AUTO
OFF using the System menu (see page 30).
Checking for sound
1. Power on your TV.
2. If you are using a cable/satellite box or other secondary source, power on
this source.
Tip: If your secondary source is connected to your TV, select the appropriate
TV input. You may need to use a different remote.
3. Power on the system.
4. Press the appropriate source button.
5. Check if sound is coming from the soundbar.
Note: If you do not hear sound from the soundbar, see “Troubleshooting” on
page 32.
6. Press
on the remote control. Check that no sound is coming from the TV
speakers.
Note: If you hear sound coming from your TV speakers, see “Troubleshooting”
on page 32.
To Next Page
Loading...
