English - 31
Display System state
8 CENTER LEVEL
Increases or decreases the level of dialogue for movies and
TV.
9 SURROUND LEVEL
NOT AVAILABLE.
10 LANGUAGE
Changes the language on the console and the ADAPTiQ audio
calibration.
11 SET OPTICAL INPUT
Sets the optical connector to Auto/TV (Default),
CBL SAT, BD DVD, GAME or AUX source.
12 SET COAXIAL INPUT
Sets the coaxial connector to Auto/TV (Default),
CBL SAT, BD DVD, GAME or AUX source.
13 SET ANALOG INPUT
Sets the analog connector to Auto/TV (Default),
CBL SAT, BD DVD, GAME or AUX source.
14 ADAPTIQ
Starts the ADAPTiQ audio calibration process.
15 PAIR ACOUSTIMASS
Reconnects the Acoustimass
®
module to the system.
16 FACTORY RESET
Sets the System menu and the ADAPTiQ audio calibration to
the
factory settings.
Error messages
Display System state
ERROR
Cannot find Acoustimass
The Acoustimass
®
module is not connected to
the console.
ERROR
Cannot find soundbar
The soundbar is not connected to the console.
<SOURCE>
No signal
The source is not connected to the console, or the
source is connected to the console and powered off.
SIDE AUX
Nothing connected
The source is not connected to the
connector on
the console.
ERROR
Call Bose
Call Bose
®
customer service. Refer to the contact
sheet in the carton.
Acoustimass
®
module status indicator
The status indicator on the back of the Acoustimass module provides information
on system activity.
Indicator activity Acoustimass module state
Amber Connected to the console.
Blinking amber Disconnected from the console.
Slow blinking amber Available to make a wireless connection to the console.
Red System error.
Getting System Information
To Next Page
Loading...
