Make the connections
At the connection end of the speaker, push one terminal lever and
insert the appropriate wire (Figure 6).
Figure 6
How to make ter-
minal connections
to the center
speaker and sur-
round speakers
Red terminal lever
Marked wire
Red terminal
lever
1. Connect one end of the speaker cord to your speaker.
A. Attach the marked wire to the red (+) terminal.
B. Attach the plain wire to the black (-) terminal.
2. Connect the other end of the same cord to your receiver or
amplifier (Figure 7).
A. Attach the marked wire to the red (+) terminal.
B. Attach the plain wire to the black (-) terminal.
l
The center speaker connects to the CENTER SPEAKER
outputs on the receiver. Some surround sound receivers
have two sets of center channel speaker outputs. Use
either set.
l
The left surround speaker connects to the LEFT SUR-
ROUND SPEAKER outputs.
l
The right surround speaker connects to the RIGHT SUR-
ROUND SPEAKER outputs.
Make
the connections
At
the connection end
of
the speaker, push one terminal lever and
insert the appropriate wire (Figure
6).
Figure 6
How
to make ter-
minal connections
to the center
speaker
and
sur-
round speakers
Marked wire
@ @
Red terminal lever
Marked wire
Red terminal
lever
1.
Connect one end
of
the
speaker cord
to
your speaker.
A. Attach the marked wire
to
the red
(+)
terminal.
B.
Attach the plain wire
to
the black (-) terminal.
2. Connect the other end
of
the same cord
to
your receiver
or
amplifier (Figure
7).
A. Attach the marked wire
to
the red
(+)
terminal.
B.
Attach the plain wire
to
the black (-) terminal.
• The center speaker connects
to
the CENTER SPEAKER
outputs on the receiver. Some surround sound receivers
have
two
sets
of
center channel speaker outputs. Use
either set.
• The left surround speaker connects
to
the LEFT SUR-
ROUND SPEAKER outputs.
• The right surround speaker connects
to
the RIGHT SUR-
ROUND SPEAKER outputs.
9
To Next Page
Loading...
