Bose VIRTUALLY INVISIBLE 300

ENGLISH - 11
FINISHING SETUP
Pairing with a SoundTouch
®
300 soundbar
To wirelessly pair your rear speakers to a SoundTouch® 300 soundbar, you need to place
the soundbar into pairing mode using the remote control.
1. On the SoundTouch® 300 remote control, press the SoundTouch® button
.
2. Press and hold
until the connectivity indicator on the soundbar blinks white.
1
2
Once paired, your speakers emit a tone. The LED indicator on the back of the
wireless receiver and the
indicator on the soundbar glow white.
Note: If your speakers don’t pair with the soundbar, see “Troubleshooting” on
page 17.