Bose Wave music system multi-CD changer User Manual

11
Using Your Acoustic Wave
®
Multi-Disc Changer
Playing the other sound sources
The light blue buttons (Figure 9) on the multi-disc changer remote turn on the Acoustic Wave
®
music system and select a sound source. Those buttons include FM, AM, AUX1, AUX2, and
CD (for the single-disc player in the Acoustic Wave
®
music system).
To turn on auxiliary components connected to the multi-disc changer, use the power button
on the component console or the remote control that came with the component.
Note: AUX1 and AUX2 buttons play an auxiliary component only if one is connected to the
AUX1 or 2 jacks on the rear of the Acoustic Wave
®
multi-disc changer.
Figure 9
Blue buttons on the
multi-disc changer remote
control
Use the remote control, the multi-disc changer control panel or the Acoustic Wave
®
music
system control panel – whichever is most convenient – to operate the changer and the other
sound sources.
Function Remote control Changer console
To change the mode of CD play................
Press again to cycle through the choices,
which appear on the console display.
• REPEAT ALL
• REPEAT ALL RANDOM
• REPEAT DISC
• REPEAT DISC RANDOM
Not available
Play/Pause Stop Next Disc CD Mode
AUX 1 AUX 2
ON/OFF
CD Mode
AWMDC_OG.book Page 11 Monday, May 5, 2003 11:03 AM

Bose Wave music system multi-CD changer Specifications

General

Brand	Bose
Model	Wave music system multi-CD changer
Category	CD Player
Language	English