How to fix no power on Boss Audio Systems 4600 Car Receiver?
If your Boss Audio Systems Car Receiver has no power, first ensure the car ignition is switched to “ACC” if the power supply is properly connected to the car accessory terminal. Also, check the fuse; if it's blown, replace it.
Why is there no sound coming from my Boss Audio Systems 4600?
If there is no sound from your Boss Audio Systems Car Receiver, first, make sure the volume isn't set to the minimum; adjust it to a desired level. Also, check the wiring connections to ensure they are properly connected.
What to do if the radio doesn't work on my Boss Audio Systems 4600?
If the radio on your Boss Audio Systems Car Receiver isn't working or the automatic station selection fails, make sure the antenna cable is firmly inserted. If the signals are too weak, try selecting a station manually.
How to fix disc loading/ejecting issues on Boss Audio Systems 4600 Car Receiver?
If your Boss Audio Systems Car Receiver won't load or eject a disc: * Remove any disc currently in the player before inserting a new one. * Ensure the disc is inserted correctly, with the label facing upward. * If the disc is dirty or defective, clean it or try a new one. * If the car's internal temperature is too high, allow the unit to cool down. * If condensation is present, leave the player off for about an hour before trying again.
Why does the sound skip on my Boss Audio Systems 4600 Car Receiver?
If the sound skips on your Boss Audio Systems Car Receiver, adjust the installation angle to be less than 30 degrees. Also, the disc may be dirty or defective, so clean it or try a new one.
What to do if the operation keys don't work on Boss Audio Systems Car Receiver?
If the operation keys on your Boss Audio Systems Car Receiver aren't working, it may be due to noise affecting the built-in microcomputer. Press the RESET button to resolve this.
What does ERROR 1 mean on Boss Audio Systems 4600 Car Receiver?
To address ERROR 1 (Mechanism Error) on your Boss Audio Systems Car Receiver, press the reset button. If the error persists, consult your nearest service dealer.
What does ERROR 2 mean on Boss Audio Systems 4600 Car Receiver?
To address ERROR 2 (Servo Focus Error) on your Boss Audio Systems Car Receiver, press the reset button. If the error persists, consult your nearest service dealer.
What does ERROR 3 mean on Boss Audio Systems 4600 Car Receiver?
To address ERROR 3 (Servo Tracking Error) on your Boss Audio Systems Car Receiver, press the reset button. If the error persists, consult your nearest service dealer.
What does ERROR 4 mean on Boss Audio Systems Car Receiver?
To address ERROR 4 (Motorize Panel Error) on your Boss Audio Systems Car Receiver, press the reset button. If the error persists, consult your nearest service dealer.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| Aux Input | Yes |
| AM/FM Radio | Yes |
| Channels | 4 |
| Remote Control | Yes |
| Equalizer | Yes |
| RMS Power Output | 45 watts x 4 channels |
Identifies and describes the function of each button on the unit's front panel.
Unit operation in damp areas and proper handling to prevent damage.
Avoid discs with residue, old labels, stickers, or non-round shapes.
Details playback compatibility for CD-R/RW media based on recording.
General advice on temporary wiring, using provided parts, consulting dealers, and placement.
Describes the two primary installation methods: DIN Front-mount and DIN Rear-mount.
Step-by-step guide for installing the unit into the dashboard using the front-mount method.
Procedures for detaching and reattaching the detachable control panel.
Important warnings regarding shock, dropping, and connector care for the D.C.P.
Instructions for resetting the unit using a pencil or the eject button.
Visual representation of the 20-pin audio/power harness connections.
Detailed chart of wire colors and functions for the ISO connector.
Illustration showing the pin layout of the 20-pin audio/power harness.
Basic operation of opening and closing the motorized panel.
Procedures for loading a CD and ejecting a loaded CD.
Critical warnings against manual panel manipulation and improper attachment/detachment.
How to release the control panel and turn the unit on/off.
Switching between audio sources and connecting external devices via Aux.
Adjusting volume using the encoder and muting the audio output.
Accessing and adjusting Subwoofer, Bass, and Treble levels.
Adjusting contrast, dimmer, and illumination color of the display.
Setting clock format (12/24 hr) and current time.
Configuring tuner frequency spacing and programmable turn-on volume.
Enabling beep tones, selectable clock display, and key illumination.
Switching between FM bands and performing manual or auto seek tuning.
Storing and recalling favorite radio stations using preset buttons.
Automatically storing stations or scanning through presets for quick access.
Adjusting tuning sensitivity to prioritize local or distant radio signals.
Instructions for inserting and ejecting CDs from the player.
Managing playback with Pause, Track Select, Repeat, Random, and Intro Scan.
How CD Text information like title and artist is displayed.
Lists the available RDS features such as AF, TA, PTY, and REG.
Automatically switches to a better frequency for the same station when signal weakens.
Prioritizes traffic announcements and provides standby mode for them.
Allows searching for stations by program type and storing PTY presets.
Steps to enter and navigate the RDS menu using the SELECT button and volume controls.
Configures auto seeking to stop at RDS or all radio stations.
Controls TA seek behavior and sets the volume for traffic announcements.
Manages regional coding for station selection during AF or PI searches.
Notes on playback restrictions, compatible media types, and file system formats.
Recommended encoder settings and support for ID3 tags and CD-TEXT.
Guidelines for naming files and folders for correct display and playback.
Describes the function of playing the beginning of each file in a folder or on the disc.
Explains how to repeat a current folder or a specific file.
Details the random playback of files within a folder or across the entire disc.
Method to search and play a specific file using its number.
Navigating through folders and selecting specific MP3/WMA files.
Searching for files and folders using alphabetical input via the encoder.
Overview of how each key functions across different modes.
Details button functions for Radio, CD Player, and MP3/WMA modes.
Specific functions of the numeric keys (1-6) for playback and presets.
Technical details of the CD player system.
Technical details of the FM radio tuner.
Power supply, polarity, impedance, and power output details.
Note that specifications are subject to change without notice.
Troubleshooting no power, no sound, and operation key malfunctions.
Solutions for disc loading/ejection, sound skips, file errors, and disc errors.
Addresses radio not working and automatic station selection problems.
Guides on resolving specific error codes (ERROR 1-4) and mechanism issues.
To Next Page