iPod
Dock
adaptors
The 755081 comes with a set
of
special iPod adaptors which fit a wide range
of
iPod
models. These are specially designed for use with the 755081, and hold the iPod firmly
to
the
dock
connector when the vehicle
is
in
motion.
Please install the appropriate
dock
adaptor as described below.
PLEASE NOTE:
"Official" Apple Universal DockAdaptors cannot be used in the 7550BI.
Do
not
attempt to connectyour iPod to the dock without the appropriate, specially-designed
adaptor
provided with the 7550BI.
BOSS Audio Systems cannot accept any responsibility for any damage
or
data loss that
may result from using
your
iPod in the 7550BI
and
the specially-designed dock adaptors.
1. Push on the face
of
the LCD
to
release
and open the iPod docking drawer.
Dock
adaptor
---...
2.
Select the appropriate size
dock
adaptor
for your iPod. Lower it into the recess in
the drawer, aligning the notches/tabs on
the FRONT edge first.
Slots
on
top
edge
of
faceplate
------.....
3.
As you lower the
dock
into the recess,
be sure
to
align the tabs
on
the
REAR
edge
of
the
dock
adaptor with the slots on the
top edge of the faceplate, and slide it down
securely into place.
-
4.
Insert your iPod into the
dock
adaptor.
Press PLAY/PAUSE
to
begin playback.
755081 User's Manual - page 4
To Next Page
Loading...
