SAFETY
NOTICE
Please read and understand the following safety information before operating this unit.
(S)
The device is suitable for 12V power supply (requires grounding).Do not connect
it to 24V power supply in trucks or buses, or else it will be damaged.
0 Please use genuine discs instead
of
incompatible discs, or it will damage the
device and/or shorten the service life.
0 Without the guide
of
qualified personnel, do not replace the fuse, or else it may
damage the device
or
cause fire.
_&
Please follow the traffic laws and regulations and do not watch programs
or
operate the device when you are driving, to avoid accidents(excluding passengers
watching through rear monitor).
0
To
ensure safety and operate the device normally, please ask qualified personnel
to install the device. Do not disassemble or repair the device without authorization,
to avoid damage and accidents. please contact a local car audio distributor
for details.
(S)
Do not put the device
in
a moist environment or water, to avoid electric shock,
damage and/or fire due to a short circuit.
(S)
The mechanic! drive part
of
the monitor uses an automatic precision transmission
component.Do not pull,push
or
rotate the device by force
or
impact the TFT
screen to avoid damaging the device.
0 Do not insert the audio plug
of
the vehicle into the master unit directly. Please
convert with the dedicated end cable provided by our company.
O When installing the unit, prevent metal objects from falling into the master unit
from the vents to avoid a short circuit and damaging the device.
Safety Statement
(S)
For the safety
of
yourself and others,
do
not watch programs
or
operate the device
when you are driving. It is prohibited by law.
O The back up monitor function should be used as an auxiliary view only. We are not
responsible for any accidents occurred during backing.
2
To Next Page
Loading...
