3. When you finish tuning, press once again the [ ], [ ] switches simultaneously.
Setting the standard pitch
In Tuner mode, you can turn the [1] knob to change the standard pitch of the tuner.
Pitch
435–445 Hz (default: 440 Hz)
Output setting
In the tuner screen, you can also change the output setting for when the tuner is in use by turning [3] knob
OUTPUT Explanation
MUTE Sound will not be output while tuning.
BYPASS
While tuning, the sound of the bass being input to the GT-1B will be output without
change. All effects will be off.
THRU Allows you to tune while hearing the current effect sound.
Playing
Now that you’re finished with the preparations, you can get started playing the GT-1B.
Selecting a Patch
The GT-1B contains numerous effects. A combination of these effects and their settings is called a “patch.” Built into its memory, the GT-1B has 99 (starting from
U01) user patches that can be overwritten, and 99 preset patches (starting from P01) that cannot be overwritten.
Selecting by Patch Number
1. Press [ ], [ ] switches to switch patches.
You can also change patches consecutively by turning the [1] knob.
When you select a patch, the buttons or PEDAL FX indicators that are turned on for that patch are lit.
To Next Page
Loading...
Need help?
General
