Need help?Do you have a question about the Boss GT-3 and is the answer not in the manual?
General| Type | Guitar Effects Processor |
|---|---|
| DA Conversion | 20-bit |
| Sampling Frequency | 44.1 kHz |
| Nominal Input Level | -10 dBu |
| Nominal Output Level | -10 dBu |
| AD Conversion | 20-bit |
| Input Impedance | 1 MΩ |
| Output Impedance | 2 kΩ |
| Dynamic Range | 100 dB or greater |
| Connectors | Input, Output, Headphone, MIDI In/Out, AC Adaptor |
| Power Supply | AC Adaptor |
| Weight | 2.2 kg |
Overview of controls, banks, patches, and effects organization.
Explanation of how sounds are organized into banks and patches on the GT-3.
Direct, quick, and normal editing methods for patch parameters.
Procedure for saving, naming, and canceling edits for patches.
Recalling user settings and using the Manual button for stomp-box control.
Operation of the built-in guitar tuner and bypass mode.
Global, system, patch change, and bank extent settings.
MIDI setup, data transfer, Harmonist, and Auto-Riff phrase definition.
Steps for assigning functions to expression and CTL pedals.
Defining sources and targets for dynamic parameter control.
Creating and programming custom Auto-Riff sequences for guitar.
How COSM models amplifiers and the available preamp models.
Practical advice for using specific effects like overdrive, reverb, and delay.
Expression pedal volume control and other useful techniques.
Advanced techniques for real-time sound manipulation with pedals.
Understanding the impact of different EQ frequencies on guitar tone.
Connecting the GT-3 to a PC for MIDI communication and troubleshooting.
Definitions of technical terms used in the manual.
To Next Page
