Do you have a question about the Boss ME-90 and is the answer not in the manual?
Bit rate | 32 bit |
---|---|
Sample rates | 48 - 48 kHz |
Sound effects | Chorus, Echo, Looper, Overdrive, Phaser, Pitch shift, Reverberation |
Sound effects quantity | 97 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Connectivity technology | Wired |
6.35 mm (1⁄4-inch) input | 1 |
6.35 mm (1⁄4-inch) output | 2 |
Power source type | AC |
Built-in display | Yes |
Depth | 220 mm |
---|---|
Width | 443 mm |
Height | 67 mm |
Weight | 2900 g |
Illustrates the connection order of effects within the signal path.
Lists available compressor and unique effect types with explanations.
Details parameters controlled by knobs for each COMP/FX1 effect type.
Lists various overdrive and distortion effect types with explanations.
Explains the parameters controlled by the DRIVE, TONE, and LEVEL knobs.
Details various modulation effect types and their sonic characteristics.
Describes the RATE, DEPTH, and E. LEVEL/RESONANCE parameters for modulation effects.
Lists different delay effect types and their sonic qualities.
Explains TIME, FEEDBACK, and E. LEVEL parameters for delay effects.
Lists available preamp models and their sonic characteristics.
Details the GAIN, BASS, MIDDLE, TREBLE, and LEVEL parameters for preamp types.
Explains how to adjust the threshold parameter for noise reduction.
Lists EQ/FX2 effect types and their operational modes.
Details parameters for EQ/FX2 effects like MODE, BASS, MIDDLE, TREBLE, LEVEL.
Lists available reverb types (ROOM, HALL, SPRING) and their characteristics.
Details effect types controllable by the expression pedal.
Guide to adjusting system parameters like output select, USB, MIDI, tuner settings.