Boss ME-90 - Knob Functions

3
Eects
Knob functions
1 2 3
Eect type
1 2 3
1. COMP
SUSTAIN
0–99
Sets how long the sound rings out
(sustains).
ATTACK
0–99
Sets the attack time of the sound.
LEVEL
0–99
Sets the volume.
2. T.WAH UP
SENS
0–99
Sets the input sensitivity.
TONE
0–99
Sets the tone (brightness) of the wah
eect.
PEAK
0–99
Sets the strength (character) of the eect.
3. SLOW GEAR
SENS
0–99
Sets the input sensitivity.
ATTACK
0–99
Sets how long it takes to reach maximum
volume.
LEVEL
0–99
Sets the volume.
4. DEFRETTER
SENS
0–99
Sets the input sensitivity.
TONE
0–99
Sets the tonal brightness.
LEVEL
0–99
Sets the volume.
5. OCTAVE
-1 OCT LEVEL
0–99
Sets the volume of the sound that’s one
octave below.
-2 OCT LEVEL
0–99
Sets the volume of the sound that’s two
octaves below.
DIRECT LEVEL
0–99
Sets the volume of the direct sound.
6. HUMANIZER
SENS
0–99
Sets the input sensitivity.
VOWEL1
a, e, i, o, u
Selects the rst vowel.
VOWEL2
a, e, i, o, u
Selects the second vowel.
7. FEEDBACKER
-
No function is controlled.
DEPTH
0–99
Adjusts how readily the feedback is
applied.
-
No function is controlled.
8. AC SIM
LOW
0–99
Species the sense of volume for the low-
frequency range.
HIGH
0–99
Species the sense of volume for the
high-frequency range.
LEVEL
0–99
Sets the volume.
9. SOLO
LOW
0–99
Species the sense of volume for the low-
frequency range.
HIGH
0–99
Species the sense of volume for the
high-frequency range.
LEVEL
0–99
Sets the volume.
10. TUNE DOWN
PITCH
-12–0
Adjusts the pitch in semitones.
-
No function is controlled.
-
No function is controlled.
11. S-BEND
PITCH
-3–+4
Adjusts the pitch in octaves.
RISE TIME
0–99
This parameter adjusts the amount
of time it is to take for the eect to
transition to the maximum.
FALL TIME
0–99
This parameter adjusts the amount
of time it is to take for the eect to
transition to the original.
11. D-COMP
SUSTAIN
0–99
Sets how long the sound rings out
(sustains).
ATTACK
0–99
Sets the attack time of the sound.
LEVEL
0–99
Sets the volume.