9
OPERATING THE UNIT
3465
1.
When you have made the necessary
connections, set the knobs as shown in
the illustration.
2. Depress the pedal switch to turn the
effect on. (Make sure that the CHECK
Indicator lights.)
3. Adjust the output balance between the
Dry and Overdrive sounds using the
BALANCE Knob.
4. Adjust the gain of the Dry or Overdrive
sound using the GAIN Knob.
5. Adjust the tone using the HIGH and
LOW EQ Knobs.
6. Adjust the LEVEL Knob so there will be
no volume difference between the ef-
fect and straight bass sounds.
To Next Page
Loading...
