Need help?Do you have a question about the Boss PH-2 Super Phaser and is the answer not in the manual?
General| Type | Phaser |
|---|---|
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Year Released | 1984 |
| Controls | Rate, Depth, Resonance, Mode |
| Inputs | 1 x 1/4" (instrument) |
| Outputs | 1 x 1/4" Mono |
| Power Supply | 9V DC |
| Dimensions | 73mm (W) x 129mm (D) x 59mm (H) |
Connection point for AC adaptor for mains power operation.
Controls the speed of the phase shift effect, adjustable from 14s to 100ms.
Adjusts the intensity or depth of the phase shift effect.
Controls the amount of feedback, emphasizing the phase shift effect.
Selects between two distinct phase sound characteristics.
Activates or deactivates the effect without click noise.
Lights up when the effect is on; also serves as a battery check.
Connects the instrument (guitar/keyboard) to the pedal.
Connects the pedal's output signal to an amplifier.
Used to open the pedal for battery replacement.
Advises on using the correct AC adaptor and avoiding extreme environmental conditions.
Illustrates how to connect the PH-2 to an amplifier and instruments.
Detailed steps for replacing the 9V battery, including opening the pedal and securing connections.
Advice on long-term storage, battery voltage impact, and keeping battery connected with AC.
Lists available BOSS AC adaptors for different voltage regions.
To Next Page
