To Next PageTo Next Page
Need help?Do you have a question about the Boss RDD-20 and is the answer not in the manual?
General| Type | Digital Delay |
|---|---|
| Sampling Rate/Frequency | 44.1kHz |
| Inputs | 1/4" phone jack |
| Outputs | 1/4" phone jack |
| Power Supply | 9V DC |
| Controls | Delay Time, Feedback, Effect Level, Mode |
Lists casing parts like top cover, front panel, and bottom panel.
Details specific knobs and buttons used on the device.
Lists all switch types and potentiometers with their part numbers.
Identifies input/output jacks and AC adapter connectors.
Lists integrated circuits, transistors, diodes, and LEDs with part numbers.
Details resistor types and other miscellaneous parts like cords and filters.
Outlines major functional blocks like Preamp, LPF, Compressor, and Delay.
Covers modulation, VCO, and main controller sections of the circuit.
Details power supply, muting, mixer, and de-emphasis circuits.
Steps to adjust the compressor section for a straight DC level.
Steps to adjust the expander section for a straight DC level.
Procedures for calibrating clock frequencies using FINE and RT settings.
Lists specific part differences between RDD-20 and RDD-10 models.
