9
• Press or to select the program set for Day of Week to be reviewed or adjusted in the
sequences below.
Monday CH <-> Monday HW <-> Tuesday CH <-> ... <-> Sunday HW -> Monday CH
• Press Set at any time to confirm the setting and return to normal mode.
• Press Select at any time to confirm the selection. The hour is flashing to indicate that it is the
selected item to be adjusted.
• Press Select to step through the items to be reviewed or adjusted in the sequences below.
(Program 1 ON) “hour” ➝ “minute” ➝
(Program 1 OFF) “hour” ➝ “minute” ➝
(Program 2 ON) “hour” ➝ “minute” ➝
(Program 2 OFF) “hour” ➝ “minute” ➝
(Program 3 ON) “hour” ➝ “minute” ➝
(Program 3 OFF) “hour” ➝ “minute” ➝
and then cycle back to (Program 1 ON)
• Press Set at any time to confirm the setting and return to program selection.
Daily program selected
• Central Heating and Hot Water have independent programmes. 3 different time settings can
be programmed for all days. Total 3 settings for TPSE101 and 3 settings for TPSE201.
• To review or change a setting, press Set in Normal mode to begin programming. The all
day and “SET PROG” are displayed. All other indicators are cleared. All days are flashing to
indicate that it is the selected item to be adjusted.
To Next Page
Loading...