2
The Solar-Powered Auto-Darkening Welding Helmet is suitable for most welding applications.
This helmet’s 1/30,000-second switch time automatically darkens the lens the moment you start
welding. No matter what shade the lter is set to, the UV/IR protection is always present.
ARC RAYS CAN INJURE EYES AND BURN SKIN
• Before welding, always inspect helmet and auto-darkening lter (ADF) to be sure they are tted properly
and in good condition.
• Keep the sensors, solar cell and lter lens clean. Clean the lter cartridge using a soapy water solution
and soft cloth. Do not use solvents or abrasive cleaning detergent.
• Do not weld in the overhead position while using this helmet.
• Inspect the lter lens frequently and immediately replace any scratched, cracked, or pitted lter lens or
cover lenses.
• Always wear safety glasses or goggles under the welding helmet, and protective clothing to protect your
skin from radiation, burns and spatter.
WARNING
SAFETY WARNING
Thank you for choosing a BOSSWELD FX-PRO Auto darkening Welding Helmet
In this manual you will nd instructions on how to set up your welding helmet along with general welding
information safety information and helpful tips. We encourage you to go online to our website for more tips and
troubleshooting as well as many welding resources.
We truly hope you enjoy using your FX-PRO Auto darkening welding Helmet.
To Next Page
Loading...