BossWeld FX-PRO - Trouble Shooting; FX-PRO Parts List

To Next Page

To Previous Page

TROUBLE SHOOTING

FX-PRO PARTS LIST

Part No: Description Part Number

Bossweld FX-PRO Lens Replacement Kit

Includes: Outer Protective Place

Shade 5 Side Screen Lenses

Side Plates Fixing Plug & Socket Kit

Inner Lens Cover

700580

2 Bossweld FX-PRO Headgear 700585

PROBLEM(S) POSSIBLE CAUSE(S) SUGGESTED SOLUTION(S)

Difcult to see through lter Cover lens dirty Clean or replace cover lens

Filter lens dirty Clean lter lens

Filter does not darken when arc

is struck

Grind Mode Selected Adjust Shade from 5-8/9 -13

Sensors or Solar Panel blocked

Make sure sensors or solar panel are

exposed to weld arc without blocking

Set Sensitivity to LOW

Adjust Sensitivity to required level

Low voltage of lithium batteries

Replace with new lithium batteries if

indicator turns red

Filter darkens without arc Set Sensitivity to HIGH Adjust Sensitivity to required level

Filter remains dark after welding Set Delay to MAX Adjust Delay to required level