6 Operating
6.1 Record
1. Press and hold [RECORD/MODE] for five seconds.
ð
The LED above the button lights up. The display shows the programme and its last
scene.
2. Press [PROGRAM] or [STROBE] to select chase or strobe programmes.
ð
The LED next to the corresponding button lights up.
3. Press [UP] or [DOWN] to select the desired programme. You can choose between 9
chaser and 9 strobe programmes.
4. Press [RECORD/MODE] to record a scene. Now create a scene on your DMX controller. If
you want to record this scene, press [RECORD/MODE].
ð
As soon as all the LEDs light up, the scene is saved. You can save up to 48 scenes.
5. Press [BLACK-OUT] until the [RECORD/MODE] LED turns off to stop recording
Recording a programme
Operating
22
SD-10
DMX recorder
To Next Page
Loading...
Need help?
General