Botex SD-10 User Manual

1. Press and hold [BLACK-OUT] for three seconds.
2. Press [STROBE] and [BLACK-OUT] simultaneously. If the device has saved scenes, the dis-
play shows ‘SURE’, otherwise ‘IN’.
3. Press [FADE+SPEED/DEL] to receive the data set.
ð
The display shows ‘IN’.
4. When receiving is complete, the display shows ‘END’. Press any button to exit this mode.
Receiving data
Operating
32
SD-10
DMX recorder

Botex SD-10 Specifications

General

Brand	Botex
Model	SD-10
Category	Music Equipment
Language	English