• TRASH ELIMINATOR
(the right knob)
OFF Position
In this position, all
different metals will be
detected.
One tone will sound for
all types of metal.
VI. TUNING and GROUND BALANCING
Forget it!
With your VLF Treasure Detector, it’s automatic.
Be it hard ground, a sandy beach, rocks, or the black sand terrains
common to gold prospecting locations, your VLF adjust itself to tune
out naturally occurring mineral deposits, and only detect the metal
objects you are looking for.
VII.CONTROLS
• POWER/SENSITIVITY
(the left knob)
The detector is off in the full counter-clockwise position (to the left).
Turn it on with a click to the right. The further clockwise, the higher the
sensitivity. If you get static or noise, then lower the sensitivity a bit.
To Next Page
Loading...
