Bounty Hunter DISCOVERY 3300 - User Manual

OWNER’S MANUAL
The
Discovery 3300
is a professional metal
detector. While the most
difficult aspects of metal detecting
have been automated, it is a
sophisticated electronic device which
requires an understanding of some basic
features and metal detecting concepts.
If you do not have prior experience with a
metal detector, we strongly recommend that you:
1) Adjust the Sensitivity to a low setting in the
event of false signals. Always begin use at a
reduced sensitivity level; use at full sensitivity
after you have become familiar with the detector.
2) Do not use indoors. This detector is for outdoor use only. Many
household appliances emit electromagnetic energy, which can
interfere with the detector. If conducting an indoor demonstration,
turn the sensitivity down and keep the searchcoil away from
appliances such as computers, televisions and microwave ovens.
If your detector beeps erratically, turn off appliances and lights,
especially those with dimmer switches.
Also keep the searchcoil away from objects containing metal, such
as floors and walls.
3) Read this manual. Most importantly, review the Quick-Start Demo
(p.7-8) and Basic Operation (p. 9-12).
4)
Use 9-volt ALKALINE batteries only. Do not use Heavy Duty Batteries.

Summary

Assembly

Adjusting the Arm Rest

Explains how to adjust the arm rest to three positions for comfort.

Batteries

Installing Batteries

Provides step-by-step instructions for correctly installing the detector's batteries.

Basic Operation

Powering Up

Details the procedure for turning the detector on and initial status indicators.

All Metal Mode

Notch Mode

Pinpoint Mode

DISC;A-M and Discrimination Mode

Covers switching between modes and using discrimination to ignore targets.

Zap Control

Sensitivity Adjustment

Describes how to adjust sensitivity for optimal detection depth and range.

Depth and Target Display

Reading the Display

Depth Indicator

Target ID Categories

Three Digit Target Indicator

Sensitivity Adjustment

Electromagnetic Interference (EMI)

Severe Ground Conditions

Multiple Targets

In the Field Techniques

Pinpointing in Motion Modes

Coil Movement

In the Field Techniques - Pinpoint Mode

Ground Balancing

Procedure for adjusting the detector to offset ground minerals before pinpointing.

Retuning

Pinpointing Detection Field

Troubleshooting

Troubleshooting Guide

A guide to diagnosing and solving common detector problems based on symptoms.

Bounty Hunter DISCOVERY 3300 Specifications

General

Frequency	6.6 kHz
Search Modes	All Metal, Discrimination
Discrimination	Yes
Number of Target ID categories	9
Target ID	Visual and Audio
Sensitivity	Adjustable
Pinpoint Mode	Yes
Depth Indicator	Yes
Preset Ground Balance	Yes
Display	LCD
Battery Type	9V
Weight	2.5 lbs
Warranty	5 years limited
Type	VLF
Intended Use	Coin, relic and general purpose metal detecting
Search Coil	8-inch Waterproof Coil
Battery Life	20-25 hours
Length	Adjustable from 42 to 51 inches