What to do if Bovie Medical Equipment shows error E8?
If the cable is disconnected, an E8 error will occur and be displayed. The unit cannot be activated while the error condition is present. To remove the error, the unit has to be reset.
What to do if Bovie Medical Equipment displays F2 error?
Release either the cut or coag button on the handpiece, or the cut or coag pedal on the footswitch.
What to do if Bovie SPECIALIST PRO Medical Equipment displays error E7?
If the Bovie Medical Equipment displays error E7: 1. Turn the unit off. 2. Allow the unit to cool for 20 minutes. 3. Turn the unit on. 4. If the error code reappears, record the number and contact Bovie® Customer Service.
What to do if Bovie Medical Equipment displays error E6?
If the Bovie Medical Equipment displays error E6: 1. Turn the unit off. 2. Verify that the unit is connected to the line voltage. 3. If the error code reappears, record the number and contact Bovie® Customer Service.
General| Brand | Bovie |
|---|---|
| Model | SPECIALIST PRO |
| Category | Medical Equipment |
| Language | English |
To Next Page
