53
M21-M26-M30
9. Control System and Programs 9.
* Dosing
** Temperature controlled
*** Depends on used solvent; at P15 /P16: 70 °C /161°F
X Plus standstill times because of the drying controller
xx Depends on the spraying time specified
The times given above correspond to the program sequences at the time of printing.
We reserve the right to make any procedural changes to times and program sequences in the interest of technical progress.
P12/P13/P14/P15/P16: via tank 3 and filter 2 (when exist)
To Next Page
Loading...
