Bowers & Wilkins CM10 S2 User Manual

ENGLISH
5
1. Unpacking
Carton Contents
Check in the carton for:
1 Foam plug
1 Accessory pack containing
4 Rubber feet
4 M6 spike feet
4 Lock nuts (10mm across ats)
1 Plinth
1 Accessory pack containing
1 Allen key
4 M6 x 35mm screws
4 Plain washers
4 Shakeproof washers
Environmental Information
This product complies with international directives, including but
not limited to:
i. the Restriction of Hazardous Substances (RoHS) in
electrical and electronic equipment,
ii. the Registration, Evaluation, Authorisation and restriction of
CHemicals (REACH)
iii. the disposal of Waste Electrical and Electronic Equipment
(WEEE).
Consult your local waste disposal authority for guidance on how
properly to recycle or dispose of this product.

Bowers & Wilkins CM10 S2 Specifications

General

Product color	White
Housing material	-
Recommended usage	Universal
Suitable for outdoor use	No
Tweeter	Yes
Speaker type	3-way
Woofer diameter	165 mm
Tweeter diameter	25 mm
Number of drivers	5
Speaker placement	Floor
Audio output channels	1.0 channels
Number of woofer drivers	3
Driver diaphragm material	Kevlar
Mid-range driver diameter	150 mm
Number of tweeter drivers	1
Woofer diameter (imperial)	6.5 \
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	6 \
Recommended amplifier power (max)	300 W
Recommended amplifier power (min)	30 W
Impedance	8 Ω
Sensitivity	90 dB
Frequency range	45 - 28000 Hz
RMS rated power	- W
Crossover frequency	4000 Hz
Total Harmonic Distortion (THD)	1 %
Connectivity technology	Wired

Weight and Dimensions

Depth	414 mm
Width	366 mm
Height	1087 mm
Weight	33500 g