Bowers & Wilkins PV1 Brochure & Specs

Technical features
Description
Drive unit
Frequency range
Frequency response
Amplifier
Low-pass filter
Dimensions
Net weight
Cabinet finish
Pressure vessel enclosure
500W ICEpower® amplifier
Switch mode power supply
Active closed-box subwoofer system
2x 200mm (8 in) dia mica / aluminium diaphragm long-throw
-6dB at 18Hz and 40/140Hz adjustable (EQ at i)
±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output: 500W
Rated power
consumption: 110W (105W - 100V version)
Input impedance: 100kohms
Signal / noise: >90dB
Functions: Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (RJ 4/4)
Outputs: Link Out (RCA Phono)
Active 2nd -order, variable cut-off frequency
(applies only to speaker level input)
Height: 335.5mm (13.2 in)
Width: 289mm (11.4 in)
Depth: 347mm (13.7 in)
20.5kg (45 lb)
Silver with grey trim
Black with anthracite trim

Bowers & Wilkins PV1 Specifications

General

Impedance	100000 Ω
Subwoofer type	Active subwoofer
Subwoofer sensitivity	90 dB
Subwoofer driver diameter	200 mm
Subwoofer frequency range	16 - 140 Hz
Equalizer	No
Phase control	Yes
Product color	Black
Headphone outputs	1
Power source type	AC
Power consumption (typical)	110 W

Weight and Dimensions

Subwoofer depth	347 mm
Subwoofer width	289 mm
Subwoofer height	335.5 mm
Subwoofer weight	20500 g