BowFlex C6: How do I adjust the resistance on my bike?
Schwinn IC4 pictured. Functionality is the same, but your bike may vary slightly.
The Roll Pin is hollow and rests inside the collar.
A properly placed roll pin will appear similar to the picture and may be mistaken as an empty hole at first glance.
7. If the resistance issue persists, order a Drive Belt[13926.H].
Important: in order to replace the drive belt, a 25mm Crank Puller will be required to remove the crank arms and
access the belt.Order a 25mm Crank Pullerin addition to the drive belt unless you have one already.
Need to order replacement parts?
1 Customer Care Contact Information
Please contact Customer Care at 1-800-605-3369 for additional help or to order replacement parts.
Some replacement parts may also be available for purchase online here.
A list of part numbers referenced within this guide can be located at the bottom of this page.
Customer Care - Hours of Operation:
Monday - Friday 6:00am - 5:00pm PST
The replacement part will be provided to you at no cost assuming your machine meets the warranty eligibility
requirements. A Customer Care Agent will be able to assess your current warranty eligibility and provide you with your
options.
Please note that if you did not purchase your machine directly from BowFlex, Schwinn, or Nautilus, we will need a copy
of your purchase receipt in order to register your machine for warranty.
Part Description Part SKU
25mm Crank Puller 8018316
Drive Belt 8022657
Resistance Shoe (Brake) Assembly 8022741
Roll Pin 8023501
3 Contact Tech Team / Advanced Troubleshooting
If the issue was not resolved in the steps listed, contact the Tech Team or send an Advanced Troubleshooting
case.
Submit a Casewithcase typeAdvanced Troubleshooting
To Previous Page
Loading...
