Routine Service and Maintenance
4.24
Do not over ll the hydraulic system. Damage to the hydraulic system might result.
e. Unscrew the dipstick assembly and remove from the machine. (1, Figure 4–25) and ll
the hydraulic tank with the proper hydraulic uid (Chevron Rykon Premium ISO 46 or
equivalent) until the uid level is just below the upper marker hole in the dipstick.
Figure 4-25 Hydraulic Fluid Level Dip Stick
f. Start the machine and run the engine at low idle for several minutes. Shut o the engine.
g. Recheck the hydraulic uid level as described above.
NOTICE
1
To Next Page
Loading...
