Fitment of Side Cover RH
• Match rear side (C) of ‘Side Cover’ lug with
hole located on chassis & press the cover
firmly.
• Match the Lug provided on front side (B) of
‘Side Cover’ with hole provided on ‘Fuel
Tank’ & press ‘Side Cover’ inside firmly.
• Match ‘Side Cover’ properly with bracket
provided on ‘Chassis’ & fix it with Screw (A).
CAUTION : Fit cover as described above
to ensure proper fitment.
Removal of Side Cover RH
• Remove the screw (A) given on the ‘Side
Cover’.
• Hold the cover with both hand and pull
front side (B) first & then rear side (C).
Take out ‘Side cover’.
CAUTION : Remove cover as described
above, otherwise the lugs may break.
A
B
C
10
Removal & Fitment of Side Covers-RH
To Next Page
Loading...
