How to Ride Your Bike
Braking :
• Close the throttle completely, leaving the
clutch engaged (except where shifting gears)
so that the engine braking will help slow
down the motorcycle.
• Shift down one gear at a time so that you
are in Neutral when you come to a complete
stop condition.
• When stopping, always apply both brakes at
the same time. De-clutch as necessary to
avoid engine stalling.
Warning : When shifting down to lower gear,
do not shift at such high speed that engine
rpm rises excessively. This may cause engine
d a m a g e , a n d r ea r w h e e l m ay s k i d.
D o w n s h i f t i n g s h o u l d b e d o n e a t
recommended speeds as shown in table.
Moving Off :
• Start the bike.
• Check that Center/Side stand is retracted.
• Depress the clutch lever.
st
• Shift the gear pedal into 1 gear.
• Open the throttle gradually and simultaneously
release the clutch lever slowly.
• As the clutch starts to engage, open the throttle
a little more, giving the engine just enough rpm
to keep it from stalling.
Gear shifting
pattern
Shifting Gears :
• Close throttle & pull in the clutch lever.
• Shift into next higher or lower gear as
desired.
• Open the throttle and release the clutch lever
slowly and simultaneously.
N
1
2
3
4
14
th rd
From 4 to 3 Gear
rd nd
From 3 to 2 Gear
nd st
From 2 to 1 Gear
32 ~ 35 km/h
23 ~ 26 km/h
15 ~ 18 km/h
Recommended Speed for Shifting Down
To Next Page
Loading...
