Boxym bpw1 - Operation Steps of Blood Pressure Measurement

V1.0
10
measurement, don’t move the muscle on this arm, if you need, you can put one soft
cushion under your arm.

In every measurement, you should use same posture and wrist.

If the position of the wrist cuff is lower or higher than heart, the reading will be higher
or lower.
make sure the wrist cuff has worn well and with the same height of the heart.
During measurement, don’t talk. Please relax your hand and arm.
During measurement, don’t walk , don’t move your shoulder and arm, don’t bend your
finger.
5.2 Operation Steps of Blood Pressure Measurement
The machine has 2 kinds of BP units,which is mmHg and KPa,please refer to 3.4 part for the
specific method of setting.
Take the mmHg value as an example in the following explanation.
1）Press the “ON/OFF” key, the machine will automatically return to zero, arm with automatic
start filling with air, the pump started to inflate the wristband,
2）In the process of inflation, the screen will display the pressure changes in the wristband.
When the machine detects the pulse, the heart icon will flash.
3) After measurement, the machine will simultaneously exhaust and displays your blood
pressure value and pulse number.
Note: the machine will automatically save the blood pressure and the pulse number.
Attention
 During measurement, keep quite until the measurement is finished.
 Make sure the machine and the heart at the same height until the measurement is finished.