Boyd S2601 - General Product Information

7
SCHM-001
Rev 2
General Product Informaon
Frame Welded steel with powder coated nish
Upholstery Standard upholstery is vinyl
Upgrades are available
Movement LC Base: Li Column - 15.81” (402mm)
Back: Electric Actuator
Tilt: Electric Actuator
Toe: Electric Actuator
Standard Swivel Mobile
Net Weight S2601: 334 lbs (151.5 kg) 372 lbs (168.7 kg) 340 lbs (154.2 kg)
S2605: 339 lbs (153.8 kg) 377 lbs (171.0 kg) 345 lbs (156.5 kg)
Electrical 24V D/C low voltage motors
Microprocessor controlled
Chair operates at 24V D/C
Power Supply 115VAC 60Hz 10A
230VAC 50-60 Hz 7A
(Refer to Serial Number Scker for required voltage)
Protecon Class: I
Electrical Shock Type: B
Liquid Protecon Ordinary equipment (IPXO)
Flammable Gases Not suitable for use in the presence of ammable gases or where such gases may accumulate in
concentraon. (Closed Space)
Operaon Mode Intermient duty cycle:
10% - 2 minutes On / 18 minutes O
Indoor use only
Operang Temperature: 5° C to 40° C (41° F to 104° F)
Temperature Relave Humidity: 20% to 90% @ 30° C - Not condensing
Atmospheric Pressure: 97kPa
Storage / Transportaon Temperature: -10° C TO 50° C (14° F TO 122° F)
Temperature Relave Humidity: 20% to 90% @ 30° C - Not condensing
Atmospheric Pressure: 45 to 115kPa
Weight Capacity 500 lbs (228 kg) Subject to normal weight distribuon
Note: Do not sit on back or adjustable toe secon. These secons are not designed to support the full
weight of paent. Do not li or slide chair using back secon or seat upholstery.
Warning: Do not modify this equipment without authorizaon from Boyd Industries, Inc.
About Your Chair (connued)