11
VIII. Parts Recovery
Step1. Confirmation of installation condition
1. The wiring and installation shall be checked prior to power
connection
2. Be cautious whether there is excessive pressure, stretch or
getting stuck with the wires
Step2. Power supply recovery
1. Connect the negative terminal of battery (-) to make sure it
functions well.
2. In case of abnormality, check the wiring arrangement.
3. Step3. Restore the cars parts step by step and check every
single part to avoid abnormal sound
IX. Operation Instruction
1. When the ACC is on, the LED lights on left and right A pillar will
be on for 2 seconds, which means the system is powered on.
The system will immediately initiate to the environmental
adaption detection, after 5-8 seconds system will start to
work.(Fig.28-Fig.29)
Fig. 28 Fig. 29
To Next Page
Loading...