3
III. Install Caution
1. Please release negative power before operation.
2. Do not pull the harness when removing the connector, insert the
connector to the buckle until a sound.
3. Harness should be fixed with car harness by cable tie.
The installation and disassembly should follow the vehicle
maintenance manual and relative operating instruction. Avoid
breaking any components of the car, replace the corresponding parts
immediately should there is any broken component.
IV. Requirements for Radar Sensor Setting
1. Radar sensor can only penetrate plastic object (bumper shell).
2. Radar sensor should not be interfered by metal objects.
3. Do not install the radar sensor against fluorescent lamps.
V. Installation Diagram
To Next Page
Loading...