boytone BT120 - User Manual

BOYTONE™ BT120 Stereo Bluetooth Speaker User Manual
Operating Instructions
Power On
When the speaker is off, press and hold the Multi-function Button(MFB) for 3 seconds,The LED indicator
will flash slowly in blue.At this time you will hear a tone that increases in volume from the speaker of the
set. The speaker will be paired with the last connected bluetooth device or mobile phone automatically
when turned on.
Power Off
When the speaker is on, press and hold the MFB for 4 seconds. The LED indicator will flash slowly in red.
At this time,you will hear a tone that decreases in volume from the speaker of the set. The speaker will
disconnect from your phone devices when turned off.
Pairing Mode
When the speaker is OFF,(And confirm the line in port without 3.5mm audio cable) press and hold MFB
for 6 seconds until the LED indicator flashes red and blue in alternating colors.
Notes:3mins pairing time,if not connect with any device,it will quit pairing mode.
Answering Calls
If a call comes in when listening to music or speaker is standing by, press the MFB to answer the
incoming call. If the music is playing, it will pause automatically during the call. After finishing your call,
the music will start playing automatically.
Reject Calls
If a call comes in when listening to music or speaker is standing by, press and hold the MFB for 2
seconds to reject the incoming call. After the call has been rejected, your music will start playing
automatically.
End Calls:To end a call, press the MFB.
Volume :To adjust the volume when talking on the phone, press the V+ or V- to adjust the volume up
or down. When you reach the max/min volume, you will hear a warning tone.
Last Number Redial:When listening to music or speaker is standing by, double click the MFB to
redial the last number. If you are listening to music, it will pause automatically during the call.
Mute: When talking on the phone, press and hold Vol+ or Vol- for 2 seconds to mute your microphone.
You will hear the caller, but the caller will not to hear you.
Note: There will be a warning tone every 3 seconds, reminding you that you are in mute mode.
Quit Mute: Hold Vol+ or Vol- for 2 seconds to exit mute mode.

Summary

Operating Instructions

Power Management

Instructions for turning the speaker on, off, and entering pairing mode using the MFB.

Call Handling

Procedures for answering, rejecting, and ending phone calls using the MFB.

In-Call Features

How to adjust volume, redial last number, and mute the microphone during calls.

Advanced Functions

Phone and Headset Switching

How to switch audio output between the speaker and mobile phone.

Reconnecting Device

Steps to reconnect the speaker to a previously paired Bluetooth device.

Voice Command Dial

Instructions for activating and canceling voice command dial on compatible phones.

Music Playback Controls

How to pause, restart, play previous, and play next songs.

Specifications

Technical Details

Lists Bluetooth version, profiles, transmission distance, size, weight, and battery life.

Device Identification

Provides the device ID and default PIN code for pairing.

LED Indicator Status

Charging Indicators

Describes LED behavior during charging and when charging is complete.

Operational Indicators

Explains LED signals for stand by, power on (talking/call), not connected, and battery low.

Pairing Mode Indicator

Details the LED light pattern when the speaker is in pairing mode.

boytone BT120 Specifications

General

Type	Portable Bluetooth Speaker
Power Output	5W
Connectivity	Bluetooth
Speaker type	Mono
Power Source	Battery