79
Responding Message
Returned result
After the meter executes a query command, the return
of the result will be in the following format:
<Result> + <CR> <LF>
For example, in auto fetching mode, the meter will
send the measured data automatically when the
measurement cycle is completed. The format of the
printed data will be shown as the following:
<Result > + <CR> <LF>
Data Types
Returned message is an ASCII string from the meter
responding to a query. A query is a command
accompanied a “?” mark. Table 3 below explains the
different data types.
Table 3 - Data Type of Responded Messages
<NR2>
representation has
an explicit radix
+1.56,-0.001,10.5
To Next Page
Loading...