B+K precision 830C - Page 90

88
CALCulate:LIMit:STATe <Boolean>
Description: Enable or disable the Limit
function of the calculation.
Example: CALC:LIM:STAT OFF
CALCulate:TOLerance:RANGe <1 | 5 | 10 | 20>
Description: Set the tolerance range of the
Tolerance function.
Example: CALC:TOL:RANG 5 ; Set 5%
tolerance range.
Note: Tolerance range can only be set when
tolerance function mode is set. When this
function is not set as the current mode,
CALCulate:TOLerance:RANGe command will
return an error on display.
CALCulate:TOLerance:BASE?
Description: Query the base value of the
tolerance function.
Response: Return <NR3> format string.
Test Equipment Depot - 800.517.8431 -
99 Washington Street Melrose, MA 02176
- FAX 781.665.0780 - TestEquipmentDepot.com