87
CALCulate:LIMit
:MODE?
:LOWer? <mode>
:UPPer? <mode>
Description: Query the mode or the value of
the Limit function.
Parameter: <mode>: The value of mode is
from 01 to 25.
Response: Return <NR1> format string.
Example:
CALC:LIM:MODE? ; Query the mode of the
Limit function.
CALC:LIM:UPP? 07 ; Query the upper value
Note: CALCulate:LIMit:MODE? Query will
respond with an error if meter is not in limit
function and if the state of limit function is
disabled. To set meter to limit function, use the
CALCulate:FUNCtion command.
To Next Page
Loading...