Need help?Do you have a question about the Bpt YVL/301I and is the answer not in the manual?
General| Type | Video Intercom |
|---|---|
| Mounting | Wall-mounted |
| Operating Temperature | -10°C to +55°C |
| Relative Humidity | 20% to 80% |
| Color | White |
Input for the main BUS line connection.
Connection for the local 18VDC power supply.
Terminal for audio signal output.
Negative terminal for output connections.
Terminal for video signal output.
Positive terminal for output connections.
Configuration for resistive load termination via SW3.
Setting for entry panel presence detection via SW6.
Adjustment for call signal attenuation via SW1.
Adjusting the HEVC/MI microphone volume.
Connection point for the monitor unit.
Connector for the YAP300 alarm and panic unit.
Specifies the required supply voltage range.
Details power consumption and standby current.
Provides physical dimensions of the device.
Specifies acceptable temperature range for storage.
Specifies acceptable temperature range for operation.
Indicates the ingress protection rating.
Specifies supported video standards (CCIR/PAL).
Details the type and size of the monitor.
Programming the melody for calls from the entry panel.
Programming the melody for calls from the landing.
Setting the number of rings for incoming calls.
To Next Page
